The NORD 580;
Hermetic automatic sliding door system delivers a technologically advanced
solution for any location that requires an airtight entrance, such as operating theatres, quarantine zones, and hospital laboratories.

Hermetic doors that can be equipped with proximity sensors or elbow buttons that do not require manual contact in order to maintain hygiene in sterile environments, can be opened by means of built-in radar sensors concealed in the mechanism if there are suitable distances.

Features sophisticated technology that allows easy operation of the sliding
door as well as exceptional reliability, ensuring low ongoing maintenance costs.

The recessed-type safety photo couple, which is also hidden inside the mechanism cover, acts as a curtain photocell integrated with the radar
sensor, making the hermetic door wing safe in the whole movement area.

Hermetic doors, which have specific application areas such as operating room, laboratory and even recording studios need sealing, are closed with full contact on the wall and floor and meet the need for airtightness.

And there are no guide elements in the doorway, allowing for a seamless floor finish, while the upper section of the door cladding itself is gently sloping to remove hard-to-clean corners

It is a system which can be used safely in every environment where air and sound insulation is needed in operating rooms and laboratory rooms where air tightness (hermetic) feature is needed.

Hermetic door mechanism and wing design is in a highly  ergonomic  structure  shaped  with   smooth anti-dust surfaces as it should be in sterile environments.

Hermetic ot door model;

Surface coating including stainless  steel, is fully compatible with universal standards and norms in compliance with the  technical  specifications  of  the  Ministry of Health.

Delivering all-round sealing, the door leaf automatically slides closed before being fractionally lowered and then pressed firmly against the integral door frame.

• Thanks to the articulated structure in the mechanism, when the wing reaches a level close to the closing point, it enters the slot with a simultaneous horizontal movement
• while the special guiding element pushes the wing against the wall and
  the wing closes by pressing on the door gap by 4 sides
• Finally, thanks to the hermetic door wing and the gaskets located on the
  chassis, the air-tight hermetic door feature is completed
• It is a professional product with reports and certifications